12L Class B LCD Display Pre-Vacuum Autoclave Steam Sterilizer Built-in Printer with Drying Function Foster12L-LCD-B

Specifications: Chamber inner dimensions: 12L=20cm×36cm(7.9*14.1'') Rated voltage: 100-240V, 50Hz/60Hz Rated power: 1800VA Sterilizing Temperature: 249.8℉ /273.2℉ (121℃/134℃) Sterilizing Pressure: 100-130 Kpa/200-240 Kpa Water tank capacity: 3.5 L Environment temperature: 41℉~104℉(+5°C~+40°C) Relative Humidity Range: 30% 75% Atmospheric pressure: 500Hpa 1060 Hpa Machine size: 41*56*42cm/16.1*22*16.5'' Weight: 50 kg Packaging size: 68*51.5*53cm/26.7*20.2*20.8''   Package: Tray rack* 1 Drainage joint*2 Tray*3 Water filter net* 1 Print paper* 1 Draining filter net*1 Tray holder *1 Door gasket*1 Power cord *1 Water outlet tube *1   Note: 1. If the front of the machine is low and the rear is high, it will affect the drainage and final drying effect. Please pay attention to properly raise the front foot of the machine. 2. The power supply must be able to afford 1800VA and grounded correctly. 3. Be sure to use distilled water. 4. Do not slant the sterilizer when there is clean water in the tank. 5. Always drain the used water tank after daily operation. 6. Do not open the door till the pressure is less than 9 kPa. 7. Do not to adjust the door if the door is closed. When adjusting the door, you should not touch the sealing lid to avoid burns. Please do the adjustment til the door is cool down. 8. Turn off the power and let it cool down before you replace the door gasket, which could avoid any burning injuries.

• 1.The steam sterilizer uses the advanced technology of 3 times pre-vacuum and vacuum drying. It ensures the hot steam to penetrate in thin tube or porous material.
• 2.The software program provides auto diagnose, protection against over heating or over pressurizing, and thus ensures reliability of the sterilization results.
• 3.Build- in condenser water collecting system prevents discharge of waste steam and keeps the machine clean and safe.
• 4.The real time display shows all the data during the sterilization cycle.
• 5.LED display panel. Double door locking-system. Sterilizing Temperature/Pressure(Under standard atmospheric pressure)121°C / (100-130) Kpa.134°C / (200-240) Kpa.