3" Gas Powered Water Transfer Pump, 7.5 HP 210cc 4 Stroke Water Pump 246GPM Gasoline Water Garden & Pond Pumps High-Pressure Gasoline Transfer Pumps for Pond Pool Draining Gardening Irrigation

Application:It is ideal for long-distance water transmission in farmland, garden irrigation, greenhouse planting, ground cleaning, fishpond aquaculture, fast drainage, water collection, swimming pool water exchange, water extraction from deep wells, firefighting, and so on.How to Start:1. Add four-stroke special engine oil.2. Add pure gasoline to the four-stroke engine.3. Fill the water injection port with water.4. Turn the air door up and close. 5. Press the oil bubble to fill it with oil.6. Pull the starter and hear the roar.7. Push down the air door to open it.8. Pull the starter again to start it.Specification:Material: Aluminum Alloy and IronColor: Black, Silver, White, RedProcesses: Polishing, Spray Molding, and Galvanizing Assembly Required: YesNumber of Items: 1Model: WP30 Engine Type: 170FStart Method: Recoil StartOutput Mode: Direct ConnectionEngine Type: Single Cylinder, Air-cooled, Four StrokePower Source: GasolineConnection Diameter: 80mm/3inCapacity: 60m³/hTotal Head: 30mm/1.18inDisplacement: 210ccPower: 7.5 HP, 5.5kwSpeed: 3600rpmOil Pot Capacity: 3.6L/0.95galMax. Water Pumping Capacity: 1000L/264gal/minSuction Force: 0.08mpaLifting Height: 28m/91.86ftMaximum Suction Lift: 7m/22.96ftProduct Size: 47*37*39cm/18.5*14.57*15.3inPackage Size: 51*39*43cm/20.08*15.35*16.93inGross Weight: 22kg/48.5lbNet Weight: 21kg/46.3lbPackage Included:1*Water Transfer Pump1*English ManualAll Accessories Required for InstallationNotes:This product does not include water hoses.Please fill the priming water fully before running, don't run dry. When using it for the first time, it is necessary to change the oil every 5-10 hours, otherwise, impurities in the oil will block the crankshaft. Gasoline engines are prohibited from stopping at high speeds and should be stopped when the throttle is lowered to the lowest possible level.Please read the operating manual and product label carefully before use and pay attention to the safety instructions included.

• ★Build to Last - This product mainly consists of an aluminum alloy pump body and an iron frame and adopts polishing, spray molding, and galvanizing processes to provide high hardness, high wear resistance, rust prevention performance, and long service life.
• ★High Safety - The aluminum alloy pump body and the multiple heat dissipation holes can timely dissipate the heat and avoid burnout or breakdown to effectively guarantee the use safety. The built-in oil protector prevents cylinder pulling and bursting caused by not adding oil or insufficient oil, making it reliable and safe to use.
• ★Efficient Water Pumping - The 7.5HP high-power engine with 210cc displacement gives it a rotation speed of 3600rpm and provides a flow rate of up to 60m³/h to quickly pump water out of rivers or ponds, and provides a suction height of 22.97ft and a total lift height of 91.86ft, providing reliable and high-performance irrigation, improving your efficiency, and saving you time.
• ★High Stability - The quadrilateral base frame and enlarged anti-slip feet provide greater stability and effective vibration reduction to ensure better performance in harsh environments.
• ★Easy to Install and Use - The product has been 85% assembled, together with the complete accessories and English manual, so you can install it easily. It adopts a manual recoil start, and the throttle and flameout switches make it convenient for you to operate.